Home » International » Status of Chandrayaan-3 Mission

Status of Chandrayaan-3 Mission

Newdelhi:3/8/23:Chandrayaan-3 spacecraft was successfully launched onboard LVM-3 on 14th July, 2023 at 14:35 hrs from the Satish Dhawan Space Centre, SHAR. The spacecraft is currently undergoing a series of orbit maneuvers with the objective of reaching the moon’s orbit and has two phases namely Earth Bound Phase and Lunar Bound Phase. The spacecraft is currently in the Earth Bound Phase.

Chandrayaan-3 components include various electronic and mechanical subsystems intended to ensure safe and soft landing such as Navigation sensors, propulsion systems, guidance & control among others. Additionally, there are mechanism for release of Rover, two way communication related antennas and other onboard electronics.

Chandrayaan-3 Lift off mass is nearly 3896 kg and the mission life of Lander and Rover is approximately one Lunar Day which is equivalent to 14 earth days. The planned landing site for lander is ~ 690S, South Pole.

The objectives of Chandrayaan-3 are:

  1. Safe and Soft Landing
  2. Rover Roving on Moon Surface
  3. In-situ Scientific Experiments.

The approved cost of Chandrayaan-3 is Rs. 250 Crores (Excluding Launch Vehicle Cost)

Chandrayaan-3 will take nearly 33 days from the launch date of 14th July, 2023 to reach the orbit of moon.

The successful soft landing on the surface of the Moon would make India the fourth country in the world to achieve such a significant technological capability. The successful soft landing is envisaged to serve as fore-runners for future landing missions and other technological progress in planetary exploration.

The soft landing of Chandrayaan-2 was planned to be carried out in multiple phases. Certain unexpected variations in performances of the Lander Module eventually resulted in higher velocities at touchdown, which was beyond the designed capability of the Lander’s legs, resulting in a hard landing.

Chandrayaan-3 has been made more robust by improvements in Lander to handle more dispersion, improvements in sensors, software and propulsion systems, full level redundancies in addition to exhaustive simulations and additional tests being conducted towards ensuring a higher degree of ruggedness in the lander.

Chandrayaan-3 in comparison to Chandrayaan-2 has been designed with the capabilities to autonomously handle wide range of dispersion in order to achieve soft and safe landing.

This information was given by the Union Minister of State (Independent Charge) Science & Technology; MoS PMO, Personnel, Public Grievances, Pensions, Atomic Energy and Space, Dr Jitendra Singh in a written reply in the Rajya Sabha today.

About Editor in chief

Ashok Palit has completed his graduation from Upendranath College Soro, Balasore and post graduation from Utkal University in Odia Language and literture.. He has also carved out a niche for himself as a scribe of eminence after joining the profession in 1988. He is also an independent media production professional. He brings loads of experience to Advanced Media, Ashok Palit as a cineaste has been active in film criticism for over three decades. As a film society activist, he soared to eminence for his profound commitment to the art film appreciation and aesthetics of cinema. His mode of discourse is often erudite but always lucid and comprehensible marked by a perfect acumen so rare in the field. A film aesthete with an immense fond of critical sensibilities, he wrote about growth and development of odia cinema in New Indian Express, The Times of India, The Hindustan Times, The Asian Age and Screen. He has been working as an Editor for Cine Samaya from 2002-2004.. He had made solid contribution on cinema in many odia Dailies and weekly such as Samaj, Prajatantra, Dharatri, Samaya, Satabadi, and weekly Samaya.
x

Check Also

Heartfelt Homage to Gandhiji on Martyrs’ Day

Bhubaneswar:30/1/25:The death anniversary of Mahatma Gandhi, the ardent apostle of truth and nonviolence is observed every year as Martyrs’ Day. Today on this occasion the state-level event was held on ...